Comparison of methods for activating sesame stalk lignin biochar for removing benzo[a]pyrene from sesame oil.

In this study, three activators and two activation methods were employed to activate sesame lignin-based biochar. The biochar samples were comprehensively characterized, their abilities to adsorb benzo[a]pyrene (BaP) from sesame oil were assessed, and the mechanism was analyzed. The results showed that the biochar obtained by one-step activation was more effective in removing BaP from sesame oil than the biochar produced by two-step activation. Among them, the biochar generated by one-step activation with ZnCl2 as the activator had the largest specific surface area (1068.8776 m3/g), and the richest mesoporous structure (0.7891 m3/g); it removed 90.53 % of BaP from sesame oil. BaP was mainly adsorbed by the mesopores of biochar. Mechanistically, pore-filling, π-π conjugations, hydrogen bonding, and n-π interactions were involved. The adsorption was spontaneous and heat-absorbing. In conclusion, the preparation of sesame lignin biochar using one-step activation with ZnCl2 as the activator was found to be the best for removing BaP from sesame oil. This biochar may be an economical adsorbent for the industrial removal of BaP from sesame oil.

Modified Chinese quince oligomeric proanthocyanidin protects deep-frying oil quality by inhibiting oxidation.

Chinese quince (Chaenomeles sinensis) fruit is an underutilized resource, rich in proanthocyanidins with antioxidant ability but poor lipid solubility. In this study, a novel modified oligomeric proanthocyanidin (MOPA) was prepared, which exhibited favorable lipid solubility (354.52 mg/100 g). It showed higher radical scavenging abilities than commercial antioxidant-BHA (butylated hydroxyanisole), both at 0.4-0.5 mg/mL. The addition of MOPA (0.04 %wt.) significantly increased the oxidative stability index of the soybean oil from 5.52 to 8.03 h, which was slightly lower than that of BHA (8.35 h). Analysis of the physicochemical properties and composition of oil during deep-frying showed that MOPA demonstrated significant antioxidant effects and effectively restricted the oil oxidation. This inhibition also delays the formation of heterocyclic amines (HAs) in fried food, thereby reducing the migration of HAs from food to deep-frying oil. Therefore, MOPA is a promising novel liposoluble antioxidant for protecting the quality of deep-frying oil.

Evaluation of Quality Properties of Brown Tigernut (Cyperus esculentus L.) Tubers from Six Major Growing Regions of China: A New Source of Vegetable Oil and Starch.

Tigernut has been recognized as a promising resource for edible oil and starch. However, the research on the quality characteristics of tigernut from different regions is lagging behind, which limits the application of tigernut in food industry. Tigernut tubers were obtained from six major growing regions in China, and the physicochemical properties of their main components, oil and starch, were characterized. Tigernut tubers from Baoshan contained the most oil (30.12%), which contained the most ß-carotene (130.4 µg/100 g oil) due to high average annual temperature. Gas chromatography analysis and fingerprint analysis results indicated that tigernut oil (TNO) consists of seven fatty acids, of which oleic acid is the major component. Changchun TNO contained the least total tocopherols (6.04 mg/100 g oil) due to low average annual temperature. Tigernut tubers from Chifeng (CF) contained the most starch (34.85%) due to the large diurnal temperature range. Xingtai starch contained the most amylose (28.4%). Shijiazhuang starch showed the highest crystallinity (19.5%). Anyang starch had the highest pasting temperature (76.0°C). CF starch demonstrated superior freeze-thaw stability (syneresis: 50%) due to low mean annual precipitation. The results could be further applied to support tigernut industries and relevant researchers that looks for geographical origin discrimination and improvements on tigernut quality, with unique physicochemical and technological properties.

Impact of high temperature on microstructural changes and oil absorption of tigernut (Cyperus esculentus L.) starch: Investigations in the starch-oil model system.

This study was to explore the internal reasons for the changes in oil absorption performance of tigernut starch (TS) by revealing the high-temperature induced variations of structural and functional properties of TS. The results showed that as the temperature increased from 80 °C to 140 °C, the degree of starch gelatinization increased, while the proportion of double helix structures, the total proportion of B1 and B2 chains, the relative crystallinity and the molecular weight decreased, accompanied by the fragmentation and swelling of TS granules. The oxidation of tigernut oil (TNO) led to a decrease in oil density and an increase in total polar component content. These phenomena could result in an increase of oil absorption capacity of TS and starch-lipid complex index. With further increase in temperature from 170 °C to 200 °C, the disruption of the crystalline structure and chain structure increased, resulting in the melting and disintegration of TS granules. This caused a decrease in the starch-oil contact area and capillary absorption of TNO by the TS granules. The results will contribute to revealing the effect of high-temperature induced changes in the structural and functional properties of TS on its oil absorption properties.

Characterisation of flavourous sesame oil obtained from microwaved sesame seed by subcritical propane extraction.

This study developed a novel and green method to produce fragrant sesame oil using microwaves and subcritical extraction (SBE). Sesame seeds were microwaved at 540 W for 0-9 min before subcritical propane extraction at 40 °C and 0.5 MPa. SBE caused less deformation to the cellular microstructure of sesame cotyledons while dramatically improving oil yield (96.7-97.1 %) compared to screw processing (SP) (53.1-58.6 %). SBE improved extraction rates for γ-tocopherol (381.1-454.9 µg/g) and sesame lignans (917.9-970.4 mg/100 g) in sesame oil compared to SP (360.1-443.8 µg/g and 872.8-916.8 mg/100 g, respectively). Microwaves generated aroma-active heterocyclics and phenolics faster than hot-air roasting in sesame oil with a better sensory profile. SBE had a higher extraction rate for aroma-active terpenes, alcohols, and esters while reducing the concentrations of carcinogenic PAHs and HCAs in sesame oil. The novel combination process of microwaves and subcritical extraction is promising in producing fragrant sesame oil with superior qualities.

Comparison of microwave and hot-air roasting on microstructure of sesame seed, aroma-active, hazardous components, and sensory perception of sesame oil.

The unclear effects of microwaves, as a greener alternative to hot air, on sensory perception, aroma, and hazardous components of sesame oil were investigated. Microwaves (900 W, 6-10 min) created more seed porosity and cell destruction and facilitated more γ-tocopherol release in sesame oil (349.30-408.50 mg/kg) than 200 °C, 20 min hot air (304.90 mg/kg). Microwaves (6-10 min) generated more aromatic heterocyclics (42.40-125.12 mg/kg) and aldehydes (5.15-2.08 mg/kg) in sesame oil than hot air (25.59 mg/kg and 1.34 mg/kg). Microwaves (6 min) produced sesame oil with a stronger roasted sesame flavour, and weaker bitter and burnt flavour than hot air. Microwaves reduced harman (≤775.19 ng/g), norharman (≤1,069.99 ng/g), and benzo(a)pyrene (≤1.59 µg/kg) in sesame oil than hot air (1,319.85 ng/g, 1,168.40 ng/g, and 1.83 µg/kg). Appropriate microwave is a promising alternative to hot air in producing sesame oil with a better sensory profile, more bioactive, and less carcinogenic components.

Guar gum series affect nanostructured lipid carriers via electrostatic assembly or steric hindrance: Improving their oral delivery for phytosterols.

Surface modification of nanostructured lipid carriers (NLCs) can be an effective way to improve their oral delivery for active ingredients. In this study, four type of guar gum series modified NLCs for the delivery of phytosterols (PS) were constructed and the effects of the polysaccharides on their structure and physicochemical properties were studied. DLS and AFM results revealed that positively charged polysaccharides could bind to PS-NLCs through electrostatic attraction and made the complexes finally take positive charges, while negatively charged polysaccharides were more likely to fill in the gaps of NLC systems to achieve a balance between electrostatic repulsion and intermolecular forces. Although all four polysaccharides exhibited good storage stability and controlled release of PS in simulated intestinal digestion, PS-NLCs modified with partially hydrolyzed cationic guar gum (PHCG) at medium or high concentrations exhibited better gastric stability, mucoadhesion, and cellular uptake, which had considerable significance for improving the oral bioavailability of PS. This might be related to the coating structure of PHCG-PS-NLCs confirmed by AFM, FTIR, and Raman characterization. This study provide a reference value for designing suitable PS-NLC complexes without synthetic surfactants.

Structural characterization of lignin-carbohydrate complexes from Chinese quince fruits extracted after enzymatic hydrolysis pretreatment.

Chinese quince fruit (CQF) contains abundant pectin; however, the pectin cannot be efficiently separated by conventional approaches because of strong lignin-carbohydrate complexes (LCC). In this study, to elucidate the structural characteristics of the original LCC formed by lignin and pectin in CQF, single and multiple enzymatic hydrolysis pretreatments were innovatively performed, and the resulting LCC preparations were comprehensively characterized using a series of techniques. The enzymatic hydrolysis pretreatments significantly increase the LCC yield, releasing LCC fractions with low molecular weights (Mw = 4660-8288 Da). LCC-4, isolated by pretreatment with cellulase plus xylanase, had the highest galacturonic acid content (15.5 %), followed by LCC-2 (isolated by xylanase pretreatment) of 14.0 %. In CQF, lignin develops lignin-carbohydrate (LC) bonds with pectin to form LCC, with phenyl-glycoside bond being the dominant linkage. Although the pectinase pretreatment reduced the pectin content, signals of the LC linkages in the 2D-HSQC spectra were enhanced. LCC-4 could be considered as the most representative of the original LCC in CQF due to its high pectin content and multiple LCC signals in the 2D-HSQC spectrum. The structural understanding of the original LCC in CQF will lay a foundation for designing appropriate methods for extracting pectin from CQF.

Interaction between Chinese quince fruit proanthocyanidins and bovine serum albumin: Antioxidant activity, thermal stability and heterocyclic amine inhibition.

Heterocyclic amines (HCAs) are carcinogenic and mutagenic substances produced in fried meat. Adding natural antioxidants (e.g., proanthocyanidins (PAs)) is a common method to reduce HCAs; however, the interaction between the PAs and protein can affect the inhibitory efficacy of PAs on the formation of HCAs. In this study, two PAs (F1 and F2) with different degrees of polymerization (DP) were extracted from Chinese quince fruits. These were combined with bovine serum albumin (BSA). The thermal stability, antioxidant capacity and HCAs inhibition of all four (F1, F2, F1-BSA, F2-BSA) were compared. The results showed that F1 and F2 interact with BSA to form complexes. Circular dichroism spectra indicate that complexes had fewer α-helices and more ß-sheets, ß-turns and random coils than BSA. Molecular docking studies indicated that hydrogen bonds and hydrophobic interactions are the forces holding the complexes together. The thermal stabilities of F1 and, particularly, F2 were stronger than those of F1-BSA and F2-BSA. Interestingly, F1-BSA and F2-BSA showed increased antioxidant activity with increasing temperature. F1-BSA's and F2-BSA's HCAs inhibition was stronger than F1 and F2, reaching 72.06 % and 76.3 %, respectively, for norharman. This suggests that PAs can be used as natural antioxidants for reducing the HCAs in fried foods.

Influence of Peanut Varieties on the Sensory Quality of Peanut Butter.

Over the years, concentrated efforts have been directed toward the improvement of desirable characteristics and attributes in peanut cultivars. Most of these breed improvement programs have been targeting attributes that involve peanut growth, productivity, drought and disease tolerance, and oil quality and content, with only a few articles focusing directly on improvements in peanut butter organoleptic qualities. There are numerous peanut cultivars on the market today, with widely differing chemical compositions and metabolite profiles, about which little is known concerning their suitability for making peanut butter. In this review, we detail how the numerous peanut varieties on the market today, with their genetically conferred physiochemical attributes, can significantly affect the sensory quality attributes of peanut butter, even in peanut butter processing lines with optimized processes. If other peanut butter processing parameters are held constant, variations in the chemical composition and metabolite profiles of peanuts have a significant impact on peanut butter color, flavor, texture, storage stability, shelf life, and overall product acceptance by consumers. Further research on breeding programs for peanut varieties that are specifically tailored for peanut butter production, and even more comprehensive research on the synergetic relationship between peanut chemical composition and peanut butter organoleptic quality, are still required.

Effects of roasting temperature and duration on color and flavor of a sesame oligosaccharide-protein complex in a Maillard reaction model.

In this work, sesame oligosaccharides (SOL) and sesame protein isolate (SPI) were isolated from dehulled sesame meal, combined and then tested as a sesame model system, to investigate the effects of roasting temperature and duration on color and flavor. The results demonstrated that SOL was more easily degraded than SPI; specifically, SOL and SPI gradually degraded at 100 °C and 150 °C, respectively. FT-IR analysis showed that characteristic bonds existing in the roasted samples were somewhat destroyed. Galactose, fructose, lysine, cysteine, and arginine showed great reduction and played an important role in color variation and flavor compound formation according to monosaccharide and amino acid analysis. Total color difference (ΔE) and browning intensity increased with roasting temperature and roasting duration. The types and concentrations of volatile flavor compounds were significantly increased, particularly heterocyclics (14.1 %-34.4 %) and phenols (28.4 %-32.4 %), corresponding to 0.3 % and 8.9 % of the unroasted samples.

The physicochemical properties of starches isolated from defatted tigernut meals: Effect of extrusion pretreatment.

If the tigernut meal left after oil extraction is used as a material for starch resources instead of being wasted, the industrial value of tigernut would be improved. Thus, we investigated the effect of extrusion before oil extraction on the yield, structure and function of starches within tigernut meals (TMS). Compared with the yield of native starch, the yield of TMS-130-11 (barrel temperature: 130 °C; feed moisture: 11 %) was increased by 1.97 %, and that of TMS-140-11 (barrel temperature: 140 °C; feed moisture: 11 %) was decreased by 7.82 %. The starches cannot be obtained when the barrel temperature is above 140 °C with 11 % feed moisture. Extrusion slightly decreased the relative crystallinity and increased the ratio of B2-chains in amylopectin. These changes resulted in reductions in peak viscosity while improving the elastic properties of the starch gel. These results will provide useful information regarding the use of starch isolated from tigernut meal.

Kinetic modeling of the sesamin conversion into asarinin in the presence of citric acid loading on Hß.

In the present work, effects of reaction temperature, reactant concentration, catalyst loading, and rotation speed on the kinetics of sesamin conversion in a sesame oil system were studied by using citric acid loading on Hß zeolite (CA/Hß) as a catalyst. A kinetic model was built for sesamin conversion. The kinetic model fits correctly the experimental concentration of sesamin and asarinin ( R S ⁢ e ⁢ s ⁢ a ⁢ m ⁢ i ⁢ n 2 = 0.93 and R A ⁢ s ⁢ a ⁢ r ⁢ i ⁢ n ⁢ i ⁢ n 2 = 0.97). The sesamin conversion is an endothermic reaction (△H rIso = 3 4.578kJ/mol). The CA/Hß catalyst could be easily regenerated by calcination, and there was no obvious loss of catalytic activity when reused. Knowledge of the sesamin conversion is of great significance for guiding production and improving the value and nutrition of sesame oil. In a word, this study lays the foundation for the scale-up of the production of asarinin from sesame oil using CA/Hß as the catalyst.

Corrigendum: Characterization of structure and antioxidant activity of polysaccharides from sesame seed hull.

[This corrects the article DOI: 10.3389/fnut.2022.928972.].

Characterization of Structure and Antioxidant Activity of Polysaccharides From Sesame Seed Hull.

Sesame seed hull is the major by-product of sesame seed processing and is rich in polysaccharides. In this work, sesame hull polysaccharides (SHP) were extracted by ultrasound-assisted alkali extraction methods with a yield of 6.49%. Three purified polysaccharide fractions were obtained after decolorization, deproteinization, and column chromatography. Then, their main composition and antioxidant activity were investigated. The dominant fraction was SHP-2 with a yield of 3.78%. It was composed of galacturonic acid (51.3%), glucuronic acid (13.8%), rhamnose (8.9%), glucose (8.4%), and others. The linkage types of SHP-2 have the α-D-GalpA-(1,4)-linked, α-D-GlcpA-(1,2)-linked, ß-T-D-Rhap-linked, ß-D-Glcp-(1,6)-linked, ß-T-D-Galp-linked, α-L-Xylp-(1,4)-linked, α-L-Araf-(1,3,5)-linked, and ß-D-Manp-(1,4)-linked. This study might provide some useful basic data for developing applications for sesame seed hull polysaccharides in the food and pharmaceutical industries.

Peanut Butter Food Safety Concerns-Prevalence, Mitigation and Control of Salmonella spp., and Aflatoxins in Peanut Butter.

Peanut butter has a very large and continuously increasing global market. The food safety risks associated with its consumption are also likely to have impacts on a correspondingly large global population. In terms of prevalence and potential magnitude of impact, contamination by Salmonella spp., and aflatoxins, are the major food safety risks associated with peanut butter consumption. The inherent nature of the Salmonella spp., coupled with the unique chemical composition and structure of peanut butter, present serious technical challenges when inactivating Salmonella spp. in contaminated peanut butter. Thermal treatment, microwave, radiofrequency, irradiation, and high-pressure processing all are of limited efficacy in inactivating Salmonella spp. in contaminated peanut butter. The removal of aflatoxins in contaminated peanut butter is equally problematic and for all practical purposes almost impossible at the moment. Adopting good manufacturing hygiene practices from farm to table and avoiding the processing of contaminated peanuts are probably some of the few practically viable strategies for minimising these peanut butter food safety risks. The purpose of this review is to highlight the nature of food safety risks associated with peanut butter and to discuss the effectiveness of the initiatives that are aimed at minimising these risks.

Structural Characterization of Polysaccharides in Waste Liquor Produced by Wet Decortication of Sesame Seeds.

The wet decortication of sesame seeds produces wastewater containing diverse minerals and organic pollutants that could be valuable resources for the food industry. This investigation aimed to reclaim, purify, and characterize the polysaccharides contained in the waste liquor from the sesame decortication industry. The purified polysaccharide fractions were characterized using monosaccharide analysis, GPC (high-performance gel permeation chromatography), FT-IR (Fourier-transform infrared) spectroscopy, methylation analysis, 1D and 2D Nucleai Magnetic Resonance (NMR) analysis, and thermal analysis. Four fractions were found (SSP-1,-2,-3, -4), of which SSP-2 was proportionately the largest and most interesting. The backbone of SSP-2 is mainly composed of (1→2,4)-ß-D-Xylp residues with side chains connected to the O-4 position, with many T-ß-D-Galp and (1→5)-α-L-Araf residues, and fewer (1→4)-α-D-Glcp, (1→2)-α-L-Rhap, T-α-L-Araf, and (1→2)-ß-D-GlcpA residues. An efficient method for removing the polysaccharides would simplify wastewater treatment while finding a use for them would benefit the sesame, food, and pharmaceutical industries.

Preparation and Characterization of Solid Acid Catalysts for the Conversion of Sesamin into Asarinin in Sesame Oil.

Asarinin, an isomer of sesamin, has attracted attention because it has stronger biological properties than sesamin. The research on the conversion of sesamin into asarinin is limited. In this study, solid acid catalysts were screened and applied to promote the conversion of sesamin into asarinin in sesame oil. The results showed that citric acid loaded on zeolite beta (CTAH) was the optimal catalyst for asarinin production among the prepared catalysts. Characterization showed that CTAH had the greatest pore volume, largest surface area and strongest acid content. Response surface methodology (RSM) was applied to optimize the reaction conditions for asarinin yield using CTAH. The optimal reaction conditions were as follows: temperature, 85 °C; time, 2.7 h; catalyst amount, 1.6%. The predicted and experimental values of asarinin yield were 50.79 and 51.80 mg/100 g, respectively. The peroxide value and color in sesame oil samples treated with CTAH were clearly improved. In short, CTAH is a solid acid catalyst with potential application in the industrial conversion of sesamin into asarinin and in the improvement of sesame oil.

Sequential aqueous acetone fractionation and characterization of Brauns native lignin separated from Chinese quince fruit.

Lignin, especially Brauns native lignin (BNL), from Chinese quince (Chaenomeles sinensis) fruit represents a potential source of natural antioxidants. However, the highly inhomogeneous structure and the carbohydrate impurity reduce the antioxidant properties of BNL. Accordingly, a sequential aqueous acetone fractionation was used to prepare pure lignin fractions with homogeneous molecular structures; these fractions showed strong antioxidant properties. Analytical results showed that the yields of F50% and F60% exceeded 20% (i.e., 20.6% and 24.1%, respectively). The sugar impurities in BNL were mainly retained in the F30% and F40% fractions. For all fractions, molecular weight increased as the acetone concentration increased. The results from 2D HSQC NMR and 31P NMR indicated that the number of lignin linkages (ß-O-4', ß-ß' and ß-5') and functional groups (S-OH, G-OH, H-OH, and COOH) of these fractions varied with their molecular weights. Antioxidant assays showed that F40%, F50% and F60% had higher antioxidant properties than BNL. Overall, the study provides a simple, environmentally friendly fractionation method to prepare lignin with various structural features and strong antioxidant properties from Chinese quince fruit. These lignin fractions have promising application in some fields with high value, such as antioxidants production, biomaterials, packaging materials, and drug delivery and so on.

Changes in key aroma-active compounds and sensory characteristics of sunflower oils induced by seed roasting.

This study investigated the changes in aroma composition and perception of sunflower oils induced by seed roasting using sensory-oriented flavor analysis. Volatile compounds were extracted by solvent-assisted flavor evaporation and headspace solid-phase microextraction. Odorants were characterized by gas chromatography-olfactometry-mass spectrometry and aroma extract dilution analysis. The cold-pressed and roasted sunflower oils contained 13 and 50 odorants, respectively, with the flavor dilution factors between 1 and 256. Fifty-six odorants were newly identified in sunflower oils. Quantification of 26 important odorants by the external standard method revealed apparent changes induced by seed roasting in loss of terpenes, formation of Maillard reaction products, and the increase in lipid oxidation products. The most important odorants (odor active values, OAVs = 1-1857) in the cold-pressed sunflower oil included α-pinene (11,145 µg/kg), ß-pinene (4068 µg/kg), linalool (56 µg/kg), hexanal (541 µg/kg), octanal (125 µg/kg), α-phellandrene (36 µg/kg), and (E)-2-octenal (69 µg/kg), contributing to the raw sunflower seed, woody, green, earthy, and sweet aromas of the oil. The most important contributors (OAVs = 1-884) to the roasted, smoky, and burnt aromas of the roasted sunflower oil were 2- and 3-methylbutanal (6726 and 714 µg/kg), 2,6-dimethylpyrazine (2329 µg/kg), 2,5-dimethylpyrazine (12,228 µg/kg), 2,3-dimethylpyrazine (238 µg/kg), 2,3-pentanedione (1456 µg/kg), 2-pentylfuran (1332 µg/kg), 2,3-dimethyl-5-ethylpyrazine (213 µg/kg), and 1-pentanol (693 µg/kg). Aroma recombination of the key odorants in odorless sunflower oil adequately mimicked the general aroma profiles of sunflower oils. This study provides an important foundation for understanding the relationship between oil processing and aroma molecules of sunflower oils. PRACTICAL APPLICATION: The clear changes observed in the composition and concentrations of key aroma compounds explained the changes in sensory characteristics of sunflower seed oils induced by seed roasting on a molecular basis. Characterizing the key aroma-active composition of sunflower oil and investigating its relationship with oil processing could provide important practical applications for the sunflower oil industry in flavor regulation, quality control, product development, and process optimization.